Rich Solar
Rich Solar 12V/200Ah LiFePO4 Deep Cycle Battery
Pay Over Time
Inventory:
Inventory
Quantity:
What makes Rich Solar 12V/200Ah Special?
Built-in Smart Battery Management System
Each cell is fused and if for some unlikely situation a cell fails, this design will isolate the cell stopping any other damage and allows the battery to function safely Convenient removable carry handle Lightweight Short circuit protected Physical damage to battery case will not cause fire
Features of the Rich Solar 12V/200Ah Deep Cycle Battery
High amp capacity Stable output voltage Little self-discharge Lifetime customer support Over charging or discharging protection. Over current & short circuit protection. High & low temperature disconnects Charge Voltage: 14.4V
Specs
| SKU | RS-B12200 |
| Electrical Specifications | |
| Nominal Voltage | 12.8V |
| Nominal Capacity(at .5C, 77°F) | 200Ah |
| Minimum Capacity (at .5C, 77°F) | 190Ah |
| Expected Cycle Life | >5000 cycles w/1C charge and discharge rate, at 77°F, 80% DOD |
| Operating Specifications | |
| Charge Method | Smart Charger, Constant Current, Constant Voltage |
| Operating Voltage | 12.8 V |
| Capacity | 200 Ah |
| Energy | 2560 Watt Hours |
| Charge Voltage Range (Max 14.6V) | 14.4 -14.6V |
| Continuous Charge Current | 100A |
| Continuous Discharge Current | 200A |
| Over Voltage Shutdown | 15.6 +/-0.2V |
| Discharge Cut-off Voltage | 8V =/- 0.5V |
| Self Discharge (stored at 50% SOC) | < 3%/month |
| Waterproof | IP65 |
| Temperature Performance | |
| Charge Temperature | 32° F to 140° F |
| Discharge Temperature | -4° F to 140° F |
| Storage Temperature | -4° F to 140° F |
| BMS High Temperature Cut-off | 149°F |
| BMS Low Temperature Cut-off | 32°F |
| Physical Specifications | |
| Battery Dimensions | 19.0″L x 6.7″W x 9.5″H |
| Weight | 42.5 lb |
| Group Size | 62 |
| Battery Post Size | 5/16″ |
| BMS Operation | |
| Over Charge Protection | |
| Over Charge Detection Voltage | 3.9 +/- 0.05V |
| Over Charge Detection Delay Time | 0.96 – 1.4s |
| Over Charge Release Voltage | 3.80 +/-0.05V |
| Maximum Charge Voltage | 3.65 +/-0.05V |
| Over Discharge Protection | |
| Over Discharge Detection Voltage | 2.0V +/- 0.05V |
| Over Discharge Detection Delay Time | 115-173ms |
| Over Discharge Release Voltage | 2.3V +/- 0.10V |
| Over Current Protection Over Current Detection Delay Time | 9 +/- 2ms |
| Over Current Release Condition | Cut Load |
| Polarity Reverse Protection | Yes |
| Short Circuit Protection | Yes |
| Warranty | 10 Year Manufacturer Defect |