








SunGoldPower
SunGoldPower 18000W 48V Split Phase Pure Sine Wave Solar Inverter Charger
Inventory

Highlights of the SunGoldPower 18000W 48V Split Phase Solar Inverter Charger
LF-PV Series Pure Sine Wave Inverter is a combination of an inverter, AC charger, Mppt solar charger and Auto-transfer switch into one complete system. The split-phase inverter requires 240VAC input and can provide 120VAC or 240VAC output power for all kinds of appliances, and it can output 50 or 60Hz via the SW4. AC/Battery Priority: Our inverter is designed with AC priority by default, you can choose the battery priority by SW5 switch. Features: Smart Remote Control, Automatic Generator Starting (AGS), Support Solar Panel with MPPT Function, Suitable for different kinds of batteries.

Uninterrupted Power
Its built-in 100 amp battery charger uses AC power, from the grid or from a generator, to recharge different kinds of battery bank. Built-in solar controllers can also connect with external controllers. Low Frequency Inverter is of High Quality and is your best choice for your 48V home system.
Specs
Main Features
- 18KW split phase pure sine inverter charger DC 48V AC 240V input AC output 120V/240V
- Auto Generator Start (AGS)
- Support Solar Panel with MPPT Function
- Include Battery Temperature Sensor (BTS) and Remote Control
- 8 kinds of battery voltage selection ( lithium LiFePO4, gel, AGM and lead Acid batteries)
- Compatible With All kind of Home & Office Appliances
- Powerful Charge Rate Up to 100Amp, Selectable From 0%-100%
- Built-in transfer switch and battery charge, backup or off grid power solutions
- AC/Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
- 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
- 8 ms Typical Transfer Time Between Utility & Battery,Ensure Power Continuity
- 15s Delay Before Transfer when AC Recover, Protection for Load when Used with Generator
- Continuous Output Power :18.0KW
- Surge Rating(20s) :54.0KW
- Output Waveform :Pure Sine Wave
- AC Output Voltage: 120V and 240V
- AC Input Voltage: 240V( not suitable for AC 120V input )
- DC Battery Voltage:48Vdc
- Solar charger Current:80Amp
- AC Battery charger:100±5Amp
- Output Frequency :50Hz /60Hz
- Typical transfer Time :10ms(Max)
DC Input
- Nominal Input Voltage :48.0Vdc
- Minimum Start Voltage :40.0Vdc / 42.0Vdc
- Low Battery Alarm :42.0Vdc / 44.0Vdc
- Low Battery Trip :40.0Vdc / 42.0Vdc
- High Voltage Alarm :64.0Vdc
- Low Battery voltage recover :62.0Vdc
- Power Saver on Idle Consumption: 50W
- Power Saver off Idle Power: 270W
Charger
- Output Voltage: Depends on battery type
- Battery Initial Voltage for Start Up: 40-62.8V
- Over Charge Protection Shutdown :62.8V
- Charger Breaker: 100A
- Input Voltage Waveform :Sine wave (Grid or Generator)
- AC input range:184-253Vac/140-270Vac
- Nominal Input Frequency :50Hz or 60Hz (Auto detect)
- Solar Charger controller: (you can disable our solar controller, and connect with external solar controller)
- Solar Input Voltage Range: 60-145V(Max 3200W)
- Rated Charge Current: 80A
- Over Charge Disconnection: 59.2V
- Over Charge Recovery: 54.4V
- Over Discharge Disconnection: 43.2 V
- Over Discharge Reconnection: 49.6V
Packaging
- 18000W 48V Split Phase Pure Sine Wave Solar Power Inverter
- English Manual
- Remote Control
- BTS Cable
- Unit Weight: 197 LB
- Unit Size: 28.7 x 16.5 x 8.7 inch
- Shipping Weight: 232 LB
- Shipping Size: 34.25 x 21.3 x 17.3 inch